Power Supply Design Seminar 2020 Agenda And

How is electricity used in ports?

Typically, the total energy demand of ports is divided into electricity and fuel consumption. Electricity is largely procured from the grid operator and used for Ship-to-Shore container cranes (STS), refrigerated container (reefer), electrical Rubber Tire Gantry (eRTG), lighting, air conditioning, etc.

What are the main energy consumers of a port?

The main energy consumers of a port are its terminals with STS and reefer containers. They represent approxi-mately 80 % of the total energy demand. The remaining 20 % is consumed by lighting, workshops and other ancil-lary buildings.

What energy sources can keep refrigerated containers' cooling systems running?

Here is an overview of different energy sources that can keep refrigerated containers' cooling systems running: At ports or storage facilities, operators typically connect reefers to shore power. This provides a stable electricity supply for continuous operation. Some refrigerated containers feature built-in generators.

Do reefer containers use a lot of electricity?

Electricity consumption was not a major issue when older reefer models were manufactured. Modern reefer containers, on the other hand, feature cutting-edge technologies to achieve superior energy efficiency.

How does a port generate energy?

To a minor extent, concepts of inde-pendent power supply and microgrids are implemented. Heat is either generated within the port by burning main-ly fossils such as oil and natural gas, or obtained from the district heating grid. The main energy consumers of a port are its terminals with STS and reefer containers.

How much power does a container vessel need?

A container vessel requires a voltage of 6.6kV and a power demand averaging from 1.5MW for the smaller vessels and up to 7.5MW for the larger vessels. It would be a challenge for a port to provide the necessary amenities that cater to all vessel types and demands for power.

What is an uninterruptible power supply (UPS)?

An uninterruptible power supply (UPS), with a 1kVA/600W capacity and line interactive design, provides battery backup for computers, servers, and office networks. It has a 220V/120V AC output voltage and is brand new, high quality, and inexpensive.

What is a datasafe HX battery?

Featuring Valve Regulated Lead Acid (VRLA) technology, DataSafe® HX batteries offer superior solutions for a range of Uninterruptible Power Supply (UPS) and IT applications. The batteries combine several select design features to maximize reliability and service life while ensuring high power, low maintenance performance.

How can ups reduce power losses in data centers?

Reducing power losses in UPS equipment by 40% contributes to improved PUE * in data centers. We provide systems like common stand-by and parallel redundant systems that can continuously provide a supply of power 24 hours a day, 365 days a year. Reduced footprint of facility equipment enables space to be secured for server equipment.

What is a datasafe HX front terminal 16V battery rack?

Fits within many existing cabinet designs including DataSafe HX Front Terminal 16V Series Battery Racks (see back) Delivering more power in less space, DataSafe® HX front terminal 16V Uninterruptible Power Supply (UPS) batteries eliminate the dificult maintenance and burdensome space requirements of top terminated 12V UPS batteries.

What is ups7000hx-t4 series?

UPS7000HX-T4 Series（For overseas applications） High efficiency of 96.5 % achieved with a three-phase, four-wire constant inverter power supply system Variety of functions achieved through our proven track record Compact and lightweight design We reduced the footprint of the facility equipment while maintaining the space for servers.

Where do you plug outdoor extension cords into a GFCI outlet?

For safety, always plug outdoor extension cords into a GFCI outlet. These can be identified by TEST/RESET buttons and are typically found in the kitchen, bath, and garage. These devices protect your family from shock in the event the cord is exposed to water.

How do you connect a GFCI to an outdoor outlet?

To connect a GFCI to an existing outdoor outlet, run the wiring indoors to its connection point, and add a separate GFCI if none exists. Before installing the GFCI, fit the mounting box for the outdoor outlet over the hole, draw in the wiring, and connect it to the outlet terminals. Finally, put the face plate on the box, ensuring all waterproof seals are correctly positioned.

How do I install an outdoor outlet?

To install an outdoor outlet, find a conveniently located indoor outlet to connect to with the wiring. Drill a hole through the house wall and feed the wiring in close to the indoor outlet. Then, fit the mounting box for the outdoor outlet over that hole.

What are the applications of grid side energy storage power stations?

Further research directions Due to the important application value of grid side energy storage power stations in power grid frequency regulation, voltage regulation, black start, accident emergency, and other aspects, attention needs to be paid to the different characteristics of energy storage when applied to the above different situations.

Are China's Grid side energy storage projects effective?

Due to factors such as high prices of energy storage devices and imperfect market models, China's grid side energy storage projects are currently in their early stages, with limited engineering applications and a lack of evaluation methods of the actual operational effectiveness of power stations from multiple perspectives.

How can energy storage power stations be evaluated?

For each typical application scenario, evaluation indicators reflecting energy storage characteristics will be proposed to form an evaluation system that can comprehensively evaluate the operation effects of various functions of energy storage power stations in the actual operation of the power grid.

What is the largest grid-forming energy storage station in China?

This marks the completion and operation of the largest grid-forming energy storage station in China. The photo shows the energy storage station supporting the Ningdong Composite Photovoltaic Base Project. This energy storage station is one of the first batch of projects supporting the 100 GW large-scale wind and photovoltaic bases nationwide.

What is the largest energy storage power station in China?

The 101 MW/202 MW•h grid side energy storage power station in Zhenjiang, Jiangsu Province, which was put into operation on July 18, 2018, is currently the largest grid side energy storage power station project in China and the world's largest electrochemical energy storage power station.

Why are energy storage stations important?

As the proportion of renewable energy infiltrating the power grid increases, suppressing its randomness and volatility, reducing its impact on the safe operation of the power grid, and improving the level of new energy consumption are increasingly important. For these purposes, energy storage stations (ESS) are receiving increasing attention.

What is output voltage regulation for paralleled uninterruptible power supply system?

Diagram of output voltage regulation for paralleled uninterruptible power supply system. When the control system detects the active circulating current and reactive circulating current in the parallel system, the increase in the inverter output voltage amplitude is calculated according to Eq. (15.40).

What is an uninterruptible power supply (UPS) system?

All rights reserved. The main objective of uninterruptible power supply (UPS) systems is to supply a sinusoidal voltage with con-stant amplitude and frequency to critical loads such as industry controllers, computer and communication syste-ms without any interruption and irrespective of load and supply conditions, .

Do uninterruptible power supply systems provide protection?

"Uninterruptible power supply systems provide protection." IEEE Industrial Electronics Magazine 1, no. 1 (2007): 28-38. . Rahmat, M., S. Jovanovic, and K. L. Lo. "Reliability and availability modelling of uninterruptible power supply systems using Monte-Carlo simulation."

What is unified control scheme for uninterruptible power supply system?

Conceptual diagram of unified control scheme for uninterruptible power supply system. Because of the three-phase four-wire configuration, the control for each phase in both the PWM rectifier and inverter can be decoupled. Therefore, a single-phase independent control approach can be adopted.

What is unified control plant in uninterruptible power supply system?

Unified control plant for single-phase pulse-width modulation (PWM) rectifier and PWM inverter in uninterruptible power supply system. Table 15.2. Parameter assignments in unified control plant. The instant variable control is the main function loop. Traditional cascaded control is adopted here.

What is output voltage control for UPS inverters?

Generally, the tasks of output voltage control for UPS inverters are providing fast dynamic responses and maintaining a perfect sinuso-idal voltage waveform even with nonlinear or changing loads. To achieve these aims, many controllers have been proposed in the literature.

How do mobile energy-storage systems improve power grid security?

Multiple requests from the same IP address are counted as one view. In the high-renewable penetrated power grid, mobile energy-storage systems (MESSs) enhance power grids' security and economic operation by using their flexible spatiotemporal energy scheduling ability.

Does mobile energy storage improve power system resilience?

Compared to stationary batteries and other energy storage systems, their mobility provides operational flexibility to support geo-graphically dispersed loads across an outage area. This paper provides a comprehensive and critical review of academic literature on mobile energy storage for power system resilience enhancement.

Is mobile energy storage a viable alternative to fixed energy storage?

Mobile energy storage can improve system flexibility, stability, and regional connectivity, and has the potential to serve as a supplement or even substitute for fixed energy storage in the future. However, there are few studies that comprehensively evaluate the operational performance and economy of fixed and mobile energy storage systems.

Why is mobile energy storage important?

Therefore, enhancing the safe and stable operation capability of the power system is an urgent problem that needs to be solved. Mobile energy storage can improve system flexibility, stability, and regional connectivity, and has the potential to serve as a supplement or even substitute for fixed energy storage in the future.

Can mobile energy storage support the power grid?

Several MESS demonstration projects around the world have validated its ability to support multiple aspects of the power grid. This subsection describes the scheduling of mobile energy storage in terms of theoretical approaches and demonstration applications, respectively.

Can a fixed and mobile energy storage system improve system economics?

Tech-economic performance of fixed and mobile energy storage system is compared. The proposed method can improve system economics and renewable shares. With the large-scale integration of renewable energy and changes in load characteristics, the power system is facing challenges of volatility and instability.

How do I use the D-RTK 2 mobile station as a base station?

When using the D-RTK 2 Mobile Station as a stationary base station, use the Power Adapter Cable and AC Power Adapter to connect to the AC power for long-term power supply. Overview D-RTK 2 Body Tripod Bottom View 1. Antenna 1. Sleeve 2. Link Button and Indicator 2. Mount Base 3. Power Button and Indicator 3. Retractable Legs 4.

How to set RTK base station baud rate?

Set Antenna as Ext. and configure the Update rate of the base station to a desired value (default is 100 Hz) and set the Receiver mode to RTK Base station. Set baud rate at 38400 and press the 'Set' button. By choosing RTK base station the additional area with Base station position appears.

What is Real-Time Kinematic (RTK) operation?

Real-Time Kinematic (RTK) operation provides centimeter-level accuracy by eliminating errors that are present in the GNSS system. For all RTK, Location RTK, or DGPS operations, you require both a rover receiver and a source of corrections from a base station or network of base stations.

How do I charge the D-RTK 2 mobile station?

Refer to the WCH2 Charging Hub User Guide and the WB37 Intelligent Battery Safety Guidelines for more details. Mounting the Battery Powering the D-RTK 2 Mobile Station On/Off Press and hold the power button to power on/off the D-RTK 2 Mobile Station. Power Button...

How do I connect xctu to a base station?

Launch the XCTU tool and establish a communication link with the module. Navigate to the Terminal window and open the serial interface. Once connected, you should see XCTU's text console displaying messages received from the Base Station. Note that the messages are not ASCII-coded.

How does a base station work?

A base station consists of a receiver that is placed at a known (and fixed) position. The receiver tracks the same satellites that are being tracked by the rover receiver, at the same time that the rover is tracking them.